GSM gateway VT20 - GSM gateway and pager (MMCXf)

GSM gateway with built-in GSM module and telephone line simulation for the control panel communicator. The GSM gateway is thus able to ensure the transmission of coded data formats of the burglar alarm control panel to the PCO in the GSM voice band. In addition, it can provide the user with an input activation message by sending an SMS, ringing or transmitting a voice message (using the GSM VT-04 VOICE expander) and can also be used to remotely control gate outputs (relays) via SMS or ringing. In addition, this gateway allows sending up to 225 SMS messages based on specific events in the control panel. These messages are generated on the basis of "interception" of the transmission format on the PCO, both 4/2 and CID.

Module type	GSM gateway
Power supply	11 - 16 V =
Current consumption	min. 40 mA, transmission. 140 mA
Current consumption	peak consumption 1.5 A up to 10 s
Activation inputs	2
Tel. numbers to activate the input	8, 4 numbers for one entry
Tel. numbers to activate the input	using an expander up to 24 phone numbers
Outputs	2 x relays, NO / NC, 2 A / 30 V
Output control	via SMS, ringing, pulse or on / off.
Description of inputs and outputs	Yes
Expander	yes, only one can be connected to the gateway
Telephone line output	RJ11 connector
SIM card	yes, 1, any operator
Automatic credit detection	yes, sending SMS
Module setup software	VTGTall_version
Module programming	VTGT software or via SMS
PC connection	RS 232 (cable included)
Antenna	self-adhesive (included)
Connector	MMCX-F
Optical signaling	LEDs status, signal strength, relay status 1.2
Recommended type of box	BOX E, BOX M, BOX S
Communication	simultaneously on PCO and SMS
Communication format	4/2, Ademco CID
Number of SMS messages	up to 72, each up to 10 phone numbers