DL-1G-RJ45-PoE-AB - surge protector for Ethernet

Two-stage Ethernet surge protection combined with power protection over this link, 1 Gbit/s (Cat.6) with PoE in mode A, B, 2 kA (10/350 µs), RJ45 connectors, installation at the entrance to the building near the protected equipment, at the interface of zones LPZ 0 and LPZ 1 and higher, to protect the Ethernet line with PoE from pulse surges, suitable for all types of PoE/PoE+/PoE++, included: universal plastic adapter for mounting on DIN rails and GND 2 bracket.

SPD type	D1, C2, C3
SPD location	ST 1+2+3
Mounting	DIN 35 rail
Maximum continuous core-to-core operating voltage	8,50 V DC
Maximum continuous pair-on-pair operating voltage (POE)	58 V DC
Rated load current per core at 25°C	0.50 A
Limited core-to-core frequency	250,00 MHz
Input attenuation at cutoff frequency	2.80 dB
D1 total discharge current (10/350 µs) core-PE	2.00 kA
C2 total discharge current (8/20 µs) core-PE	10,00 kA
C2 rated discharge current (8/20 µs) core-PE	1.25 kA
C2 rated discharge current (8/20 µs) core-core	0,15 kA
C2 rated discharge current (8/20 µs) pair-pair (POE)	0,15 kA
C2 protective voltage level mode pair-pair (POE) at In	90 V
C2 protective voltage level mode core-PE at In	600 V
C2 protective voltage level mode core-core at In	60 V
C3 protective voltage level mode core-PE at 1kV/µs	500 V
C3 protective voltage level mode core-core at 1kV/µs	45 V
C3 protective voltage level mode pair-pair (POE) at 1kV/µs	85 V
Core-core	1 ns
Core-PE response time	100 ns
Connection (input-output)	RJ45/RJ45
Criticality	IP 30