DGP LAN V + - SERIAL I / O-TCP / IP to DGP converter

DGP LAN V + is a converter for connecting DIGIPLEX EVO control panels to an Ethernet network. It is possible to connect to WINLOAD (DGP 48, 848, 96, EVO 48, 96, 192), NEWARE (DGP 96, EVO 48, 96, 192) or VAR-NET INTEGRAL (EVO 192). The converter is connected to the SERIAL I / O connector from which it is also powered. The converter settings are made using the DGP LAN SET software. To establish DGP-DGP LAN V +-PC communication, it is necessary to install the REDIRECTOR software on the PC side. This SW creates a virtual COM on the PC, to which the communication is directed.

Module type	LAN / internet communication module
Power supply	12V =, from the control panel via the connector
Current consumption	max 200 mA
Firmware	No
Module setup software	DGP LAN SET
Communication software	Redirector
WinLoad	yes, (DGP / EVO)
NEWARE	yes, (DGP 96 / EVO)
VAR-NET INTEGRAL	yes, (EVO192)
Connection to the control panel	4-pin cable to the control panel's SERIAL connector
Execution	printed circuit board
Construction	in the box to the exchange
Power cable length	30 cm
Optical signaling	2 x LEDs for network status on the module