Camera traps
Hunting optics
Inspection cameras
OXE Power
Camera systems
Security systems
Video and audio phones
Access systems
Fire alarm
Structured cabling
Other electronics
Telecommunication
ACM12 v4.13 - for older exchanges and WinLoad
Access module, connected to the BUS bus of DIGIPLEX EVO control panels. It is used to create 1 access point - 1 reader, 2 detectors (magnet, PIR detector) for monitoring passages through the door, relay output to open the door lock, power supply. The module supports the connection of readers with...
Product code: 1509-007 EAN: 8595584633390 Producer: PARADOX
Only registered customers can view the price and make a purchase. More info.
- Description
- Product inquiry
Access module, connected to the BUS bus of DIGIPLEX EVO control panels. It is used to create 1 access point - 1 reader, 2 detectors (magnet, PIR detector) for monitoring passages through the door, relay output to open the door lock, power supply. The module supports the connection of readers with Wiegand 26 bit output and readers with RS485 PARADOX output.
For readers from other manufacturers, do not switch on the audible signal, if the buzzer is activated, the reader will stop reading the enclosed cards.
ATTENTION! Version 4.13 is the last that can be programmed with WINLOAD software
For readers from other manufacturers, do not switch on the audible signal, if the buzzer is activated, the reader will stop reading the enclosed cards.
ATTENTION! Version 4.13 is the last that can be programmed with WINLOAD software
| Module type | access module + source |
| Programming software | WINLOAD, BABYWARE |
| Addressing of the module in the system | unique SN number |
| Reader input | yes, 1 indoor / outdoor RS485 / Wiegand 26 bit reader |
| Interface for readers from other manufacturers | Wiegand 26 bit |
| Power supply | 16 V ~, 40 VA |
| Power supply | one transformer. for multiple modules |
| Source type | switched |
| Max. current consumption from AUX output | 1A |
| AUX output type | electronic return fuse 1.1 A |
| Recommended backup battery | 12 V, 7 Ah / 18 Ah |
| Current consumption of the module | max.80 mA |
| Number of entrances / zones | 2, zone CT (magnet), REX (exit button) |
| Tamper entrance | yes, NC tamper module |
| Programmable PGM output | yes, 1 x transistor 50 mA |
| Output for opening the door lock | yes, 1 x relay |
| Max. output load | 5 A / 25 V =, NC / NO |
| Optical signaling | BUS RX / TX / ERROR LED |
| Optical signaling | AC / BATT / AUX LED |
| Recommended transformer type | 40 VA, separate transformer |
| Recommended box type | BOX M-40, BOX S-40, BOX VZ-40 |
